vl53l1x-microbit

Open this page at https://github.com/martinclausen2/vl53l1x-calliope

Summary

This extension supports the VL53L1X time-of-flight ranging sensor in Calliope MakeCode programming.
The extension is available for almost all VL53L1X breakouts.

Pin connection

Calliope Grove A0	VL53L1X breakout
SCL	SCL
SDA	SDA
3V	+V (VIN, Vcc)
GND (0V)	GND
NC	XSHUT
NC	GPIO1

• VL53L1X Breakout must be 3.3V drivable
• I2C address: 0x29

Methods

• Initialize (Always run at the beginning)

VL53L1X.init()

• Get Distance as Number(mm)

VL53L1X.readSingle()

• Get Distance as String

VL53L1X.stringDistance()

• When the sensor times out, the distance obtained will be zero.
• If the measurement target is too far or the measurement cannot be performed correctly, the distance obtained will be 9999.

Example

VL53L1X.init()
basic.forever(function () {
    serial.writeLine(VL53L1X.readSingle())
})

Use as Extension

This repository can be added as an extension in MakeCode.

• open https://makecode.calliope.cc/
• click on New Project
• click on Extensions under the gearwheel menu
• search for https://github.com/martinclausen2/vl53l1x-calliope and import

Metadata (used for search, rendering)

• for PXT/calliope

<script src="https://makecode.com/gh-pages-embed.js"></script><script>makeCodeRender("{{ site.makecode.home_url }}", "{{ site.github.owner_name }}/{{ site.github.repository_name }}");</script>