A ESP32 based RGBWW controller
All feature requests are tracked in the GitHub issue tracker. Feature Requests
This RGBWW control board has been designed to allow smart control of an attached LED strip. It supports 5 seperate channels that are switched via N Channel Mosfets, this is sutiable for the majority of LV LED devices. It is designed to integrate with a home automation system such as Home Assistant, though can operate standalone via an access point.
The module has been kept as compact as possible and allows for a direct connection to 12v or 24v vehicle systems.
If you want to support the development you can purchase this board as a DIY kit or assembled from my Ko-Fi Shop SmartRV Shop
This is the pre-production initial design files with planned features and initial designs. Design is as far untested.
- Upload full Kicad files
- ESP32 Microcontroller
- Serperate 5 channel LED control 1a per channel
- Reverse voltage protection
- FTDI programmer pinout
- 12v input
- On board programming
- Bluetooth connection to hub
| 3D Model | PCB Schematic |
 |
 |
| PCB Layout |
 |
This board does not have any fuse protection as such this must be provided externally.# SmartRV-RGBWW