Skip to content

Commit

Permalink
Automatic English texts updated
Browse files Browse the repository at this point in the history
  • Loading branch information
@testinguser
testinguser committed May 27, 2024
1 parent 1998e1e commit dac2e4f
Showing 1 changed file with 0 additions and 38 deletions.
38 changes: 0 additions & 38 deletions locale/translation.js
View file
Original file line number Diff line number Diff line change
Expand Up @@ -465,7 +465,6 @@ gettext('Channel 0');
gettext('button for selecting the \nchannel to send to the LED');
gettext('**2-to-1 Mux**');
gettext('01-Mux-2-1-button-LED');
gettext('01-Mux-2-1-button-LED');
gettext('System TFF: It toogles its output on every system cycle');
gettext('D Flip-flop (verilog implementation)');
gettext('Parameter: Initial value');
Expand All @@ -474,11 +473,8 @@ gettext('Input data');
gettext('# D Flip-Flop \n\nIt stores the input data that arrives at cycle n \nIts output is shown in the cycle n+1');
gettext('01-Mux-2-1-button-LED');
gettext('01-Mux-2-1-button-LED');
gettext('01-Mux-2-1-button-LED');
gettext('01-Mux-2-1-button-LED');
gettext('Constant bit 0');
gettext('01-Mux-2-1-button-LED');
gettext('01-Mux-2-1-button-LED');
gettext('2bits constant value: 3');
gettext('Generic: 2-bits generic constant (0,1,2,3)');
gettext('## Example: Manual testing of the 2-to-1 Mux\n\nThe Green LED is on (at its maximum bright) when the button is not pressed. \nWhen the button is pressed a 50 percent duty cycle signal is sent to the \nLED. The green LED is on but less bright');
Expand All @@ -487,7 +483,6 @@ gettext('## RGB LED');
gettext('Red and blue disabled');
gettext('Negative logic');
gettext('Positive logic: \n* ON: 1\n* OFF: 0');
gettext('01-Mux-2-1-button-LED');
gettext('Alhambra-II');
gettext('Nandlang-go-board');
gettext('ULX3S-12F');
Expand All @@ -502,16 +497,11 @@ gettext('02-Mux-2-1-Bus4-button-LED');
gettext('02-Mux-2-1-Bus4-button-LED');
gettext('02-Mux-2-1-Bus4-button-LED');
gettext('02-Mux-2-1-Bus4-button-LED');
gettext('02-Mux-2-1-Bus4-button-LED');
gettext('02-Mux-2-1-Bus4-button-LED');
gettext('02-Mux-2-1-Bus4-button-LED');
gettext('02-Mux-2-1-Bus4-button-LED');
gettext('Bus4-Split-1-3: Split the 4-bits bus into two: 1-bit and 3-bits buses');
gettext('not-x3: 3-bits not gate');
gettext('## Example: Manual testing of the 4-bits 2-to-1 Mux\n\nThe switch selects which number is displayed on the RGB LED. Channel 0 \ncontains the 4-bit number `1010` and the channel 1 has `0101`. The most \nsignificant bit is displayed on a external LED');
gettext('switch for selecting the \nchannel to send to the RGB LED');
gettext('External LED');
gettext('02-Mux-2-1-Bus4-button-LED');
gettext('Alhambra-II');
gettext('Nandland-go-board');
gettext('ULX3S-12F');
Expand Down Expand Up @@ -591,7 +581,6 @@ gettext('## Edges detector\n\nIt generates a 1-period pulse (tic) when an edge (
gettext('The output is 1 if the current value is 1 and the \nprevious 0, or if the current value is 0 and the \nprevious 1\n');
gettext('In any other case the output is 0');
gettext('03-Mux-4-1-button-LED');
gettext('03-Mux-4-1-button-LED');
gettext('Rising-edge detector. It generates a 1-period pulse (tic) when a rising edge is detected on the input');
gettext('1bit register (implemented in verilog)');
gettext('DFF-rst-x16: 16 D flip-flops in paralell with reset');
Expand All @@ -612,18 +601,14 @@ gettext('Initial default \nvalue: 0');
gettext('Mux 2-1');
gettext('D Flip-flip\n(System)');
gettext('03-Mux-4-1-button-LED');
gettext('03-Mux-4-1-button-LED');
gettext('Button-tic: Configurable button that emits a tic when it is pressed. ECP5 FPGA Family');
gettext('Configurable button (pull-up on/off. Not on/off). ECP5 FPGA family');
gettext('03-Mux-4-1-button-LED');
gettext('03-Mux-4-1-button-LED');
gettext('4bits constant value: 0');
gettext('03-Mux-4-1-button-LED');
gettext('03-Mux-4-1-button-LED');
gettext('not-x2: 2-bits not gate');
gettext('## Example: Manual testing of the 4-to-1 Mux\n\nFour signal with duty cycles of 100%, 50%, 25% and 0% are selected and displayed on \nthe Green LED. When the button is pressed, the next channel is selected, starting from channel 0');
gettext('switches for selecting the \nchannel to send to the LEDs');
gettext('03-Mux-4-1-button-LED');
gettext('Alhambra-II');
gettext('Nandland-go-board');
gettext('ULX3S-12F');
Expand All @@ -636,12 +621,7 @@ gettext('04-Mux-4-1-Bus4-button-LEDs');
gettext('04-Mux-4-1-Bus4-button-LEDs');
gettext('04-Mux-4-1-Bus4-button-LEDs');
gettext('04-Mux-4-1-Bus4-button-LEDs');
gettext('04-Mux-4-1-Bus4-button-LEDs');
gettext('04-Mux-4-1-Bus4-button-LEDs');
gettext('04-Mux-4-1-Bus4-button-LEDs');
gettext('04-Mux-4-1-Bus4-button-LEDs');
gettext('## Example: Manual testing of the 4-bits 4-to-1 Mux\n\nThe switches select which number is displayed on the RGB LED: `0101`, `1010`, `0011`, `1100`');
gettext('04-Mux-4-1-Bus4-button-LEDs');
gettext('Alhambra-II');
gettext('Nandland-go-board');
gettext('ULX3S-12F');
Expand Down Expand Up @@ -684,7 +664,6 @@ gettext('### 6%');
gettext('### 3%');
gettext('### 1.5%');
gettext('05-Mux-8-1-button-LED');
gettext('05-Mux-8-1-button-LED');
gettext('Reg-x03: 3-bits register');
gettext('DFF-03: Three D flip-flops in paralell');
gettext('DFF-04: Three D flip-flops in paralell');
Expand All @@ -694,12 +673,8 @@ gettext('DFF-rst-x02: Two D flip-flops in paralell with reset');
gettext('05-Mux-8-1-button-LED');
gettext('05-Mux-8-1-button-LED');
gettext('05-Mux-8-1-button-LED');
gettext('05-Mux-8-1-button-LED');
gettext('05-Mux-8-1-button-LED');
gettext('05-Mux-8-1-button-LED');
gettext('## Example: Manual testing of the 8-to-1 Mux\n\nEight signals with duty cycles of 100%, 50%, 25%, 12%, 6%, 3% and 1.5% are selected and displayed on \nGreen LED. The three switches select the input channel');
gettext('switches for selecting the \nchannel ');
gettext('05-Mux-8-1-button-LED');
gettext('Alhambra-II');
gettext('Nandland-go-board');
gettext('ULX3S-12F');
Expand All @@ -716,13 +691,8 @@ gettext('06-Mux-8-1-Bus4-button-LEDs');
gettext('06-Mux-8-1-Bus4-button-LEDs');
gettext('06-Mux-8-1-Bus4-button-LEDs');
gettext('06-Mux-8-1-Bus4-button-LEDs');
gettext('06-Mux-8-1-Bus4-button-LEDs');
gettext('06-Mux-8-1-Bus4-button-LEDs');
gettext('06-Mux-8-1-Bus4-button-LEDs');
gettext('06-Mux-8-1-Bus4-button-LEDs');
gettext('## Example: Manual testing of the 4-bits 8-to-1 Mux\n\nThe switches select which number is displayed on the RGB LED: `0x1`,`0x2`,`0x4`,`0x8`,`0x9`,`0xA`,`0xC`, `0xF`');
gettext('RGB LED');
gettext('06-Mux-8-1-Bus4-button-LEDs');
gettext('Alhambra-II');
gettext('Nandland-go-board');
gettext('ULX3S-12F');
Expand All @@ -734,7 +704,6 @@ gettext('**1-to-2 DeMux**');
gettext('07-deMux-1-2-button-LED');
gettext('07-deMux-1-2-button-LED');
gettext('07-deMux-1-2-button-LED');
gettext('07-deMux-1-2-button-LED');
gettext('3bits constant value: 0');
gettext('07-deMux-1-2-button-LED');
gettext('## Example: Manual testing of the 1-to-2 DeMux\n\nThe bit 1 is sent to either channel 0 or channel 1 depending on the \nswitch. When it is ON, the RGB turns green. When it is OFF, the RGB \nLED turns red');
Expand All @@ -747,7 +716,6 @@ gettext('iCESugar-1.5');
gettext('08-deMux-1-2-Bus-button-LED');
gettext('## Example: Manual testing of the 4-bits 1-to-2 DeMux\n\nThe 4-bits constant is sent to the 4 most significant LEDs or the 4 \nleast significant LEDs');
gettext('08-deMux-1-2-Bus-button-LED');
gettext('08-deMux-1-2-Bus-button-LED');
gettext('Display8-4: Display a 8-bits value on an 4-LEDs. The sel input selects the nibble to display ');
gettext('Counter-x01: 1-bit counter');
gettext('08-deMux-1-2-Bus-button-LED');
Expand All @@ -765,7 +733,6 @@ gettext('09-deMux-1-4-button-LEDs');
gettext('09-deMux-1-4-button-LEDs');
gettext('09-deMux-1-4-button-LEDs');
gettext('09-deMux-1-4-button-LEDs');
gettext('09-deMux-1-4-button-LEDs');
gettext('## Example: Manual testing of the 1-to-4 DeMux\n\nThe bit 1 is sent to output channels 0 - 3 depending on the \nswitches. Each channel is connected to a different LED');
gettext('Alhambra-II');
gettext('Nandland-go-board');
Expand All @@ -781,7 +748,6 @@ gettext('10-deMux-1-4-Bus-button-LEDs');
gettext('10-deMux-1-4-Bus-button-LEDs');
gettext('10-deMux-1-4-Bus-button-LEDs');
gettext('10-deMux-1-4-Bus-button-LEDs');
gettext('10-deMux-1-4-Bus-button-LEDs');
gettext('2bits constant value: 0');
gettext('External LEDs');
gettext('Alhambra-II');
Expand All @@ -800,7 +766,6 @@ gettext('11-deMux-1-8-button-LEDs');
gettext('11-deMux-1-8-button-LEDs');
gettext('11-deMux-1-8-button-LEDs');
gettext('11-deMux-1-8-button-LEDs');
gettext('11-deMux-1-8-button-LEDs');
gettext('## Example: Manual testing of the 1-to-8 DeMux\n\nThe constant 1 is sent to output channels 0 - 7 depending on the \nswitches. The 8 output channels are grouped into a byte. The switch \nS1 determines which nibble is displayed on the LEDs');
gettext('Alhambra-II');
gettext('Nandland-go-board');
Expand All @@ -814,12 +779,9 @@ gettext('TFF-verilog. System TFF with toggle input: It toogles on every system c
gettext('## Example: Manual testing of the 2-bits 1-to-8 DeMux\n\nThe constant 0x3 is sent to output channels 0 - 7 depending on the \ncounter. When the button is pressed, the counter is increased and \nthe next LED is turned on');
gettext('Byte 0 \n(least significant) ');
gettext('12-deMux-1-8-Bus-button-LEDs');
gettext('12-deMux-1-8-Bus-button-LEDs');
gettext('Display16-4: Display a 16-bits value on an 4-LEDs. The sel input selects the byte to display ');
gettext('12-deMux-1-8-Bus-button-LEDs');
gettext('12-deMux-1-8-Bus-button-LEDs');
gettext('12-deMux-1-8-Bus-button-LEDs');
gettext('## Example: Manual testing of the 2-bits 1-to-8 DeMux\n\nThe constant 0x3 is sent to output channels 0 - 7 depending on the \nswitches. The external button selects which 4-bits group is displayed \non the RGB LED');
gettext('External button');
gettext('000-index');
gettext('001-index');

0 comments on commit dac2e4f

Please sign in to comment.