Docker

Docker

Configuration

Running udp-proxy-2020 via a docker container is a little more complicated than a typical docker container because you have to deal with two networks.

To make things work, you need to specify an IP address on the two (or more) network interfaces you wish to bridge. So if you have two networks:

1. 192.168.5.0/24 on eth0
2. 192.168.15.0/24 on eth1

You would need to find an available IP address on each of those networks and then assign them to the udp-proxy-2020 docker container.

Let's assume you choose 192.168.5.2 and 192.168.15.2, then you would use the following docker-compose.yaml:

version: '3.3'
services:
  udp-proxy-2020:
    container_name: udp-proxy-2020
    image: synfinatic/udp-proxy-2020:latest
    environment:
      - PORTS=9003
      - INTERFACES=eth0,eth1  # specify network interfaces here
      - EXTRA_ARGS=-L debug
      - TIMEOUT=250
      - CACHETTL=90
    restart: unless-stopped
    networks:
      macvlan_roon:
        ipv4_address: 192.168.5.2  # eth0 IP
      macvlan_main:
        ipv4_address: 192.168.15.2 # eth1 IP


# tell docker-compose that these networks already exist
networks:
    macvlan_roon:
      external: true
    macvlan_main:
      external: true

Running

Just edit docker-compose.yaml and modify the environment variables as necessary and then run docker-compose up to start!