Add the option for 120hz into Ghelper

[Datumz]

Basically I would like it to be possible to set the refresh rate to 120hz in the Ghelper app and if possible still allow overdrive. When I go to computer settings for my Zephyrus G16 I am able to change the refresh rate to 120hz, but not directly through the Ghelper app. I would greatly appreciate that to be possible in app since it could help save some FPS and achieve lower temps when playing games and not be super noticeable when compared to dropping down to 60hz while playing.

[seerge]

@Datumz hello, if your display does not support that refresh rate - you can't set it. Same applies for Overdrive.

I don't know what specific device you have, but judging from "G16" name, I can assume that it's 2024 G16 with OLED screen? Then - OLEDs don't have a separate overdrive toggle, they are already very responsive.

Thanks

[Datumz]

Well in the settings of the computer I am able to change my refresh rate to 120hz, but Ghelper doesn't display it as an option. Further more, when I set the refresh to 240hz, it does mention overdrive on Ghelper, I didn't know that it didn't make a difference on OLED screens. So why doesn't my Ghelper say 120hz but my computer settings do?

[seerge]

@Datumz by default G-Helper shows only minimal (60hz) and maximal refresh rates in the UI. I don't see much practical sense in overcomplicating things, but you can obviously set 120hz in windows settings if you like :)

You can also override either minimal or maximal refresh rate buttons in the app as well, by setting desired values in the config as explained in power-user settings :)

[Datumz]

I know I can set my display to 120hz in the windows settings, but I was looking for an easier and more convenient way of doing so which would have been adding it to Ghelper. I was just trying to see if it was possible since on my laptop I am able to change it to 120hz and it would save on temps while playing games.

[seerge]

@Datumz you can replace either 60hz or 240hz button with 120hz by setting it in config then.

[Datumz]

Can I add my own 3 option?

[seerge]

No, UI has enough space only for 4 buttons in total - 2 refresh rate buttons + Auto button + Miniled toggle button (for models that support that)

[Datumz]

This is what it looks like now, but because miniled is available on some devices I can't add another button?

[seerge]

Yes, you can only replace one of the existing buttons.

[Datumz]

I'm trying to find where the option is on the config and no where does it show the 60hz option on this file.

[seerge]

@Datumz you need to add it manually

[Datumz]

Oh thanks, that worked, I wasn't familiar, I thought I just had to change what was already there.